Square-foot load method with climate adjustments

BTU Calculator AC Size & Tonnage for Any Room or Home

Estimate the cooling load of a room or a whole house in BTU per hour, then see the AC tonnage, the standard unit size to buy and the airflow your ducts must carry.

  • Rooms or whole homes
  • Climate adjusted
  • Tons & CFM included
  • Free, no sign-up
BTU & AC Tonnage Calculator
Fill in the fields marked *
sq ft

Room: length × width. Home: conditioned living area.

ft
Advertisement

How the BTU Calculator Works

A BTU (British Thermal Unit) is a unit of heat. An air conditioner's capacity is measured in BTU per hour: how much heat it can remove from your home every hour. This calculator starts with a load per square foot for your climate and adjusts it for the things that add or remove heat.

Step 1: Base load Base BTU/h = Area (sq ft) × Climate factor × (Ceiling height ÷ 8)

Climate factor: 18 (cool), 22 (mild), 26 (warm) or 30 (hot) BTU per square foot.

Step 2: Adjustments BTU/h = Base × Insulation × Sun + 600 × (people − 2) + Kitchen

Insulation: ×1.15 poor, ×0.9 good. Sun: ×0.9 shaded, ×1.1 very sunny. A kitchen adds 4,000 BTU/h.

Step 3: Tons and airflow Tons = BTU/h ÷ 12,000 · CFM = Tons × 400

The recommended unit is the smallest standard size that covers the load (allowing up to 5% under), so it is neither undersized nor oversized.

BTU Chart by Square Footage

Base cooling load before adding people and kitchens, with average insulation, normal sun and 8 ft ceilings.

Area (sq ft)Mild climateHot climate
2505,500 BTU/h · 0.5 t7,500 BTU/h · 0.6 t
4008,800 BTU/h · 0.7 t12,000 BTU/h · 1.0 t
60013,200 BTU/h · 1.1 t18,000 BTU/h · 1.5 t
80017,600 BTU/h · 1.5 t24,000 BTU/h · 2.0 t
1,00022,000 BTU/h · 1.8 t30,000 BTU/h · 2.5 t
1,20026,400 BTU/h · 2.2 t36,000 BTU/h · 3.0 t
1,50033,000 BTU/h · 2.8 t45,000 BTU/h · 3.8 t
1,80039,600 BTU/h · 3.3 t54,000 BTU/h · 4.5 t
2,00044,000 BTU/h · 3.7 t60,000 BTU/h · 5.0 t
2,50055,000 BTU/h · 4.6 t75,000 BTU/h · 6.3 t
3,00066,000 BTU/h · 5.5 t90,000 BTU/h · 7.5 t

Duct Sizing by Home Size

Once you know the tonnage, see the trunk and branch duct sizes for common home sizes.

BTU Calculator FAQ

How many BTU do I need per square foot?
Most homes need about 18 to 30 BTU per square foot of cooling, depending on climate. About 22 BTU per square foot is a good starting point for a mild climate with average insulation and 8 ft ceilings. Sunny rooms, poor insulation and high ceilings push it higher.
How do I convert BTU to tons?
Divide by 12,000. One ton of air conditioning removes 12,000 BTU of heat per hour, so a 36,000 BTU/h load needs a 3-ton system.
What size AC do I need for a 2,000 sq ft house?
In a mild climate a 2,000 sq ft home with average insulation, four people and a kitchen needs about 49,000 BTU/h, which is a 4-ton system. In a hot climate it is closer to 5.5 tons (often split into two systems), and in a cool climate about 3.5 tons.
Is it bad to oversize an air conditioner?
Yes. An oversized AC cools the house too quickly and shuts off before it removes enough humidity, so rooms feel clammy. It also cycles on and off more, which wastes energy and wears out the compressor sooner.
How much do people and kitchens add to the BTU load?
Each person beyond the first two adds about 600 BTU/h. A kitchen adds about 4,000 BTU/h because of cooking appliances. The calculator includes both adjustments.
Can I use this instead of a Manual J load calculation?
Use it for planning, budgeting and checking a quote. For buying and installing new equipment, ask for an ACCA Manual J calculation, which accounts for every wall, window and duct run in your home.

Related Guides

Free HVAC tools

More HVAC Calculators

Turn your cooling load into airflow and duct sizes.

Sponsored Recommendations Advertisement