Air changes & 400 CFM/ton methods

Room CFM Calculator How Much Airflow Does Your Room Need?

Find the airflow (CFM) a room needs from its size and use, or from its cooling load. You also get the air changes per hour and the round duct size to supply it.

  • Any room type
  • Air changes or BTU
  • Duct size included
  • Free, no sign-up
Room CFM Calculator
Fill in the fields marked *
ft
ft
ft
ACH

* Each register gets its own branch duct

Advertisement

How the CFM Calculator Works

CFM (cubic feet per minute) is how much air your HVAC system has to deliver to a room. There are two common ways to find it: from the room's size and how often its air should be replaced, or from the room's cooling load.

Room size method (air changes per hour) CFM = (Length × Width × Height) × ACH ÷ 60

Room volume in cubic feet, times the number of times per hour the air should be replaced, divided by 60 minutes.

Cooling load method CFM = (BTU/h ÷ 12,000) × CFM per ton

One ton of cooling is 12,000 BTU/h. Most systems move about 400 CFM per ton.

Branch duct size Diameter (in) = √(4 × CFM ÷ (π × 700 FPM)) × 12

Rounded up to the next standard round duct size, at a quiet residential velocity of 700 feet per minute.

Recommended Air Changes per Hour by Room

RoomAir changes / hourNotes
Bedroom5 – 6Quiet supply, low velocity
Living / family room6 – 8More people and electronics
Kitchen7 – 8Cooking heat; use a separate exhaust hood
Bathroom8Plus an exhaust fan for moisture
Home office6 – 8Computers add heat
Basement3 – 4Below grade, stays cool
Garage / workshop4 – 6Higher if you run tools or heaters

CFM by Room Size

Quick answers using 1 CFM per square foot (8 ft ceiling). Open a size to see its BTU load and duct size.

CFM Calculator FAQ

How do I calculate the CFM for a room?
Multiply the room length, width and ceiling height to get its volume in cubic feet, multiply by the air changes per hour (ACH) the room needs, then divide by 60. A 12 × 14 ft bedroom with an 8 ft ceiling at 6 ACH needs 1,344 × 6 ÷ 60 = 134 CFM.
How many CFM per square foot do I need?
A common rule of thumb for homes is about 1 CFM per square foot with 8 ft ceilings. Rooms with high ceilings, lots of sun or many people need more; basements and shaded rooms need less. The calculator shows your result in CFM per square foot so you can compare.
How many CFM per ton of air conditioning?
Most residential systems are designed for about 400 CFM per ton (12,000 BTU/h). Humid climates often use 350 CFM per ton for better dehumidification, and dry climates up to 450 CFM per ton.
What is a good air change rate for a bedroom?
Around 5 to 6 air changes per hour is a good target for a bedroom supply. That keeps the room comfortable without the noise and drafts that come from pushing too much air through one register.
What size duct do I need for my room?
Once you know the CFM, size the branch duct so the air moves at about 600 – 700 feet per minute. For example 100 CFM needs about a 6" round duct and 200 CFM about an 8" duct. Use the "Size this duct" button to check it with friction loss in the full duct calculator.
Is this the same as a Manual J calculation?
No. This calculator gives a quick, reliable estimate for planning and checking. A full ACCA Manual J load calculation looks at insulation, windows, orientation and local weather, and is what you should use to size new equipment.

Related Guides

Free HVAC tools

More HVAC Calculators

Take your airflow number further: size the ducts or check the cooling load.

Sponsored Recommendations Advertisement